It is easily available in a comprehensive range of MS square & Rectangular Pipes which is used to manufactured in unique design in rectangular and square at the manufacturer's end.

Mild Steel (MS) pipes are manufactured using low carbon (less than 0.25%) steel to sustain temperature.Due to low carbon content the pipes do not harden and are easy to use.

MS Pipe, MS Tube refers to Mild Steel Pipe or Mild Steel Tubes used for industrial and domestic use.MS pipes are always manufactured by using low carbon which is less than 0.25% of steel.

It is easily available in a comprehensive range of MS square & Rectangular Pipes which is used to manufactured in unique design in rectangular and square at the manufacturer's end.

Seamless pipe is called because it is a pipe without a seam or a weld-joint in contrast In a Seam or Welded pipe, Seamless pipe have only one disadvantage that is the pipe limiting the strength of the pipe to the strength of the weld-joint.

Galvanized Pipes or Iron was the oldest piping material in the plumbing industry for the transportation of water and wastewater.Galvanized Pipes can be called as excellence in quality.

Stainless Steel pipes are made after passing through much process and these pipes never get corrosion and it can be used for long time purpose without any maintenance.

These types of pipes are used in construction site and its length can be 3 meter, 6 meter, 9 meter, 18 meter. The raw material used in manufacture of Spiral SAW is H.R. Coil so that it can sustain high pressure and temperature.

The Stainless Steel Large Diameter Pipes are specifically manufactured according to the design as per ASTM a 358 standard using graded stainless steel.Its Unit Pipe Length can vary from 3 meter, 6 meter, 9 meter and 18 meter.

Tube Trading CO provides IBR approved pipes and we supplied across the India with a trustworthy level. IBR pipes which are supplied by us are supplied by us are the top quality of raw material.Tube Trading CO provides IBR pipes in size of 1/2 inch, 3/4 inch, 1 inch, 2 inch.

It is one type of coupling or connector which is used in between of the two pipes. Its sizes can vary from 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch and it mostly used in Structure Pipe, Gas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe.

ERW (Electrical Resistance Welding) pipes are manufactured usually by cold forming of steel coil into a round cylindrical shape.pipes length can vary from 12m, 30m, 3m, and 6m. ERW pipes 1/2, 3/4, 1, 2.

Mild Steel ERW Pipes length can vary from 3m, 6m, DRL and its sizes can vary from 1/2" to 24" and above, 1/8" NB TO 24" NB Sch 40/80/160/XXS, ANSI B 36.10 and ASTM A 530/A 530M.

We are well known Suppliers, Dealer, Exporter and Manufacturers of Butt-welded Pipe Fitting End Caps in India. Butt-welded Pipe Fitting End Caps that are made with precision using the best quality raw material.

We are well known Suppliers, Dealer, Exporter and Manufacturers of Forged Pipe Fitting End Caps in India.